Laboratory Equipment

ONE WEEK TO GO!

Only 1 week left to register for our upcoming #webinar “Viscosity in Pharmaceuticals”, hosted by @RheoSense

If you work in pharmaceutical formulation, research and development or quality control you do not want to miss this webinar!

We will be sharing examples of how viscosity can be used to analyze protein and antibody formulations and will show data demonstrating rate sweeps, temperature sweeps, determining formulation stability and composition, and finally injectability.

Reserve your seat TODAY! https://www.rheosense.com/pharmaceutical-viscosity-webinar

2 weeks left to register in webinar “Viscosity in Pharmaceuticals”!

Only 2 weeks left to register for our upcoming #webinar “Viscosity in Pharmaceuticals”, hosted by @RheoSense

Reserve your seat TODAY! https://www.rheosense.com/pharmaceutical-viscosity-webinar

DID YOU KNOW?

Protein-based drugs are the fastest growing class of drugs for the treatment of many diseases in humans.

Viscosity can be used in early-stage candidate selection to identify which drugs will likely cause issues in manufacturing and production down the road.

Join us for a webinar on 10 June 2021 as we discuss various applications of viscosity measurements in pharmaceuticals, specifically protein and antibody formulations.

DSR500: a rheometer to meet your requirements…

With its motorized lift, built-in temperature control unit and all the features of the DSR500, this new cone-plate rheometer optimizes your measurements and guarantees high performance even without a PC!

+ Automatic lift for gap
+ Quick attachment with AC265 coupling
+ Shear rate and shear stress control
+ Direct curve on display
+ Ramp programming
+ Direct analysis with regressions
+ Direct control of temperature unit (from – 20°C to + 300 °C)
+ Wide viscosity range (1 to 28 000 000 mPa.s)
+ Programming and recording method
+ Direct measure with time to stop
+ User and locked mode
+ Data recording and USB transfer
+ Torque gage on display
+ Integrated temperature probe
+ Printer connection
+ Compatible with RheoTex software

Norms ASTM : D4287 ; BS 3900 ; DIN 3219 ; 52007-1 ; 53019-1 ; 54453 ; ISO 2884; 3219 ; 10364-12.

For technical questions, price or instrument demonstration please contact us at info@n-wissen.de or +49 (0) 69 8900 4008.

New centrifuges, S300 series and PlateSpin3 to be released!

S300 series and PlateSpin3 centrifuges have been successfully announced, taking over our best-seller models: 2420, 2800 and PlateSpin II (PCR Plate Centrifuge).
These models have new features and benefits such as “2-Second Imbalance Detector”, “Mixed-loading buckets”, etc.

Find our more about the products on our website here.

Come and Meet us at Analytica 2020 on 19. – 22. October 2020

Over again N-Wissen GmbH will please the visitors with the latest technology in the field of laboratory analyses.

Thus, during Analytica exhibition we will present the newest benchtop density meter DA-800 series with a multiple sample changer, the world’s first electromagnetic viscometer EMS-1000S for small volume samples up to 90 μL, the fully automatic titration system which combines both potentiometric titration and volumetric KF titration modules, high precision compact refractometers, the newly released PCR plate centrifuge PlateSpin3, Shashin high speed mixers for fast, efficient and bubble-free mixing of multi-material compounds and much more…

Come and meet us at the Booth 311 in the Hall A1.

Breakthrough technology in viscosity measurement

N-Wissen GmbH introduces the world’s first electromagnetic viscometer EMS-1000S with rheological properties for viscosity measurement of micro samples up to 90μL.

The EMS viscometer is a new type innovative small volume viscometer that changed the common sense of viscosity measurement. With simple operation, this instrument enables quick and precise measuring of small amount of the sealed sample. Disposable containers also free the user from cleaning sample container after measurements.

Main Features:

1. Small sample volumes required: 300μL (standard) or 90μL (optionally)
2. Covers very wide viscosity range: 0.1 to 1 000 000 mPa·s
3. Low viscosity measurement at constant or changed shear rates possible
4. Integrated temperature control unit allows to set and reach quicly the temperature within range of 0℃ to 200℃, ±1℃
5. Sealed Containers: toxic, volatile or anaerobic samples can be measured
6. Disposable Containers: no need to clean the sampel containers after measurement. During measurement, the samples are not contaminated.
7. Short Measuring Time: only 1 second is required to measure samples with a viscosity below 100 mPa·s and approx. 1 minute is required to measure samples with a viscosity of 10 000 mPa·s
8. Shear rate: 0.01 to 150s-1 (depending on the sample’s viscosity). The shear rate can be varied by changing the rotational speed of motor, flow curves can be determined.
9. Continuous measurement: by seating the measurement time, shear rate and temperature you can observe the viscosity changes of the same sample.
10. Reliable measurement by viewing the status of sample with the integrated camera. You can check the status of the sample in real time with the built-in camera in the main unit.

The specially coated accessories offered exclusively by N-Wissen GmbH make the instrument to be suitable for viscoelastic materials like polymers, protein solutions, suspension, emulsions, etc.

For technical questions, price or instrument demonstration please contact us at info@n-wissen.de or +49 (0) 69 8900 4008.

VOC Emission Test Chamber for automotive industry acc. to ISO 12219-1:2012

N-Wissen GmbH intriduces a new VOC Emission Test Chamber according to the requirements of the standard ISO 12219-1:2012 “Interior air of road vehicles – Part 1: Whole vehicle test chamber – Specification and method for the determination of volatile organic compounds in cabin interiors”.

The chamber provides standard testing environment or simulates a real environment to test the pollutant emission rate and emission characteristics. Main environmental factors include temperature, relative humidity, illuminance, background concentration and air speed.

Technical Specifications:

Temperature Range: 20°C – 30 °C adjustable
Humidity Range: 40% – 70 % adjustable
Ventilation Flow Range: 30-1200 m3/h adjustable
Wind Rate: ≤ 0,3 m/s
Inner Chamber Dimensions (DxWxH): 800 x 500 x 350 cm (140 m³)
Background Concentration: Benzene <0.01mg/m³; Methylbenzene <=0.02mg/m³; Xylene <=0.02mg/m³; Ethylbenzene <=0.02mg/m³; Styrene <=0.02mg/m³; Formaldehyde <=0.02mg/m³; Acetaldehyde <=0.01mg/m³; Acrolein <=0.01mg/m³

We can design and manufacture wide range of VOC and formaldehyde emission test chambers for automotive products, according to customer requirements and various standards, such as ISO 12219-2, ISO 12219-3, PV 2005, PV 1200, PV 3942, PV 3341, VDA 276-1, VDA 275, VDA 277 and others.

For technical questions, price and more information please contact us at info@n-wissen.de or +49 (0) 69 8900 4008.

Ozone Resistant Test Chamber

In operation the rubber materials deteriorate when exposed to ozone. Thus it is vey important to have test methods in which simple, accelerated time/exposure, comparisons of the material’s ability to resist cracking caused by ozone exposure can be empirically evaluated.

N-Wissen GmbH is glad to present the new Ozone Resistant Chamber OZT-QL-15040 for testing rubber materials and components according to the following standards:

ASTM D1149 – 18 “Standard Test Methods for Rubber Deterioration – Cracking in an Ozone Controlled Environment”
ISO 1431-3:2017 “Rubber, vulcanized or thermoplastic – Resistance to ozone cracking”

For technical questions, price and more information please contact us at info@n-wissen.de or +49 (0) 69 8900 4008.

Opening the Logistic Center for KEM Kyoto spare parts and consumables in Europe

We are glad to introduce our new logistic center of KEM (Kyoto Electronics Manufacturing) in Europe for spare parts and consumables based on N-Wissen GmbH site, which is located in the region of Frankfurt / Germany.

The new center will help the customers of KEM instruments to get support and supply of the needed spare parts and consumables in the fastest way. The full operations will start on 7th of January, 2019.

For more information please visit our website or contact us directly at info@n-wissen.de or +49 (0) 69 8900 4008.